Chevrolet Silverado: Power Windows / Programming the Power Windows
Programming may be necessary if the vehicle battery has been disconnected or
discharged. If the window is unable to express-up, program each express-close window:
- Close all doors.
- Turn the ignition on or to ACC/ACCESSORY.
- Partially open the window to be programmed. Then close it and continue to
pull the switch briefly after the window has fully closed.
- Open the window and continue to press the switch briefly after the window
has fully opened.
Remote Window Operation
If equipped, this feature allows the windows to be opened remotely. If enabled
in vehicle personalization, press and hold
on the RKE transmitter. See Vehicle
Personalization.
Window Automatic Reversal System
The express-close feature will reverse window movement if it comes in contact
with an object.
Extreme cold or ice could cause the window to auto-reverse...
If equipped, the power sliding rear window works when the ignition has been turned
on or to ACC/ACCESSORY, or Retained Accessory Power (RAP) must be active...
Other information:
The right instrument panel fuse block access door is on the passenger side edge
of the instrument panel.
Pull off the cover to access the front of the fuse block.
To access the back of the fuse block:
Push the tab at the top of fuse block down...
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on
briefly when the engine is started. It provides information about tire pressures
and the TPMS.
When the Light Is On Steady
This indicates that one or more of the tires are significantly underinflated...
Categories
The vehicle has a passenger sensing system for the front outboard passenger position.
The passenger airbag status indicator will light on the overhead console when the
vehicle is started.
United States
Canada
read more