Chevrolet Silverado: Power Windows / Window Automatic Reversal System & Automatic Reversal System Override
Window Automatic Reversal System
The express-close feature will reverse window movement if it comes in contact
with an object.
Extreme cold or ice could cause the window to auto-reverse. The window will operate
normally after the object or condition is removed.
Automatic Reversal System Override
Warning
If automatic reversal system override is active, the window will not reverse
automatically. You or others could be injured and the window could be damaged. Before
using automatic reversal system override, make sure that all people and obstructions
are clear of the window path.
When the engine is on, override the automatic reversal system by pulling and
holding the window switch if conditions prevent it from closing.
All windows can be opened without holding the window switch. Press the switch
down fully and quickly release to express open the window.
If equipped, pull the window switch up fully and quickly release to express close
the window...
Programming may be necessary if the vehicle battery has been disconnected or
discharged. If the window is unable to express-up, program each express-close window:
Close all doors...
Other information:
Transfer Case
When to Check Lubricant
Refer to Maintenance Schedule to determine when to check the lubricant.
Fill Plug
Drain Plug
To get an accurate reading, the vehicle should be on a level surface.
If the level is below the bottom of the fill plug (1) hole, located on the transfer
case, some lubricant will need to be added...
Warning
Never fill a portable fuel container while it is in the vehicle. Static
electricity discharge from the container can ignite the fuel vapor. You or others
could be badly burned and the vehicle could be damaged. To help avoid injury to
you and others:
Dispense fuel only into approved containers...
Categories
![](images/books/1/chevrolet_silverado_vehicle_alarm_system_145.gif)
The indicator light, on the instrument panel near the windshield, indicates the
status of the system.
read more